Showing posts with label light safety. Show all posts
Showing posts with label light safety. Show all posts

Friday, June 27, 2014

Home Maintenance Checklist

There are tons of ways that you can keep your clean and safe and your SERVPRO team is here to give you tips on how to do so!
Weekly, you can:
  1. Vacuum your carpet. (Rule of thumb: vacuum once per week per human inhabitant, twice per pet).
  2. Feel plugs/ outlets for warmth. Call electrician if anything appears unusual.

Monthly, you can:
  1. Change air filters (if there are no pets, smoking inside the home, or inhabitants with allergies, you may change them quarterly at a MINIMUM).
  2. Test smoke and carbon monoxide alarms by pushing ‘test’ button.
  3. Check faucet and hose connections under sinks and toilets and behind laundry equipment and refrigerator.
  4. Look for leaks at shut-off valves.
  5. Check walls and ceilings for brown spots. Check painted surfaces for peeling, chipping or blistering. This can be indicative of water damage.
  6. Clean dust from molding and baseboards to preserve value.

Quarterly, you can:
  1. Check inside basement walls for dampness or water stains.
  2. Check to make sure crawl space vapor barrier is in good condition and placed correctly.
  3. Examine outside vents and gutters. Make sure properly sealed and clear of obstruction. Recheck vents during and after a snowstorm.
  4. Check condition of caulking around sinks, bathtubs, and showers. For extra protection, replace with long-lasting material such as silicone or latex.
  5. Clean dirt and dust from around furnaces, air grills and ducts.
  6. Have dryer vent cleaned by professional or remove lent with leaf blower to prevent clogging or fire damage. Check vent if clothes aren’t drying properly.

Bi-Annually, you can:
  1. Have carpet cleaned by professional cleaner to preserve fabric or warranty.
  2. Practice fire escape plan with family. Identify off-site meeting location/shelter.
  3. Pull back floor insulation in basement or crawl space to check for leaks, wood damage around supply pipes.

Annually, you can:
  1. Change batteries in smoke and carbon monoxide detectors. Clean detectors/vacuum each grill.
  2. Have property inspected and treated for termites by professional technician.
  3. Check roof for damaged shingles and flashing.
  4. Replace washer/dryer and refrigerator hoses (steel braided hoses are recommended).
  5. Have AC unit serviced by professional technician. Condensation drain lines need to be checked for clogging to prevent water damage.
  6. Have fireplace inspected and cleaned by professional chimney sweeper.
  7. Drain garden hoses and store for winter.

Long Term Reminders:
  1. Every 5 years, have ducts cleaned by professional technician.
  2. Every 25 years, replace roof shingles.

More general safety tips include:
  •  Store emergency contact information (police, fire dept., hospital, etc.) in physical and digital locations. Free apps are available as a resource (see servpro.com/ready).
  • Keep rescue ladder(s) for multi-story homes.
  • Keep fire extinguisher in kitchen and on every floor. Have all house dwellers practice use.
  • Plug a rechargeable flashlight into socket close to bed. May also be used to signal first responders.
  • Trim back branches from roof and chimney to prevent fire or structural damage.
  • Regularly clean fireplace ash pit.
  • Never burn green wood. Burn only dry, well-seasoned hard wood that has been split properly.
  • Use dryer sheets when drying clothes to reduce spontaneous combustion. Let clothes cool off before transferring.
  • If a rotten-egg type smell is detected, check pipes for possible gas leak.
  • Set water heaters no higher than 120 degrees. Keep combustible and flammable material away from heater.
  • Consider a sprinkler system in home to prevent fire damage.
  • Never plug more than one high wattage appliance in single outlet.
  • Keep carpet stretched and healthy to prevent tripping on wrinkles. If wrinkled, check for delamination by pulling carpet back from corner of room. Delaminated carpet is not repairable and must be replaced.


In case of water damage, you should know what to do and what not to do until help arrives. SERVPRO’s got your back. Here are our tips:

DO:
  • Shut off the source of water if possible or contact a qualified party to stop the water source.
  • When access to the power distribution panel is safe from electrical shock, turn off circuit breakers in wet areas of the building.
  • Remove as much excess water as possible by mopping and blotting.
  • Wipe excess water from wood furniture after removing lamps and tabletop items.
  • Remove and prop up wet upholstery cushion for even drying.
  • Place aluminum foil or wood blocks between furniture legs and wet carpeting.
  • Any painting, art object, computers, document and other material that are valuable or sensitive to moisture should be relocated to a safe, dry place.
  • Use wooden clothespins to keep furniture skirting off damp floors.
  • Hang draperies with coated hangers to avoid contact with wet carpeting or floors.
  • Hang furs and leather good to dry separately at room temperature.



DON’T:
  • Enter rooms with standing water where electrical shock hazards may exist.
  • Enter affected areas if electrical outlets, switches, circuit breakers or electrical equipment are exposed to water. Always avoid electrical shock hazards.
  • Leave books, newspapers, magazines or other colored items on wet carpet or floors to cause staining.
  • Leave oriental rugs or other colored rugs on wet wall-to-wall carpets to cause staining.
  • Use your household vacuum cleaner to remove water, possibly causing electrical shock or damage to the vacuum cleaner.
  • Use TVs or other appliances while standing on wet carpets or floors, especially not on wet concrete floors.
  • Turn on ceiling fixtures if ceiling is wet.
  • Enter rooms where ceiling is sagging from retained water.


Tuesday, November 22, 2011

Inspecting Holiday Lights







Whether you've been coupon trimming, dethawing, cleaning, or just salivating, I'm willing to bet your sights are on the turkey. But what about the day after? It's a likely bet that the half of you who aren't braving the Black Friday crowds will be home pulling out the garland, the stockings, the creepy singing figurine, and most of all the lights.

Holidays lights certainly make the season brighter, but these romantic little twinkles are actually responsible for one-fifth of the injuries from holiday decorating treated in hospital ER's (according to US Consumer Product Safety Commission--CPSC--reports). If electric shock and fire is not on the menu this season, then I recommend continuing through some basic safety precautions with us. All it takes to examine light sets for possible defects is a few extra moments.

For All Types of Christmas Lights


After ensuring they're unplugged, check the string of lights for frayed insulation, loose connections, and exposed bare wires. Repair (if possible) or discard sets displaying these potential trouble spots.

Check all light sockets and make sure that none of them are broken or cracked. If sockets are damaged, throw the light set away. After examining each set, place it on a non-flammable surface and plug it in for 10-15 minutes before decorating. If the set is not working properly, or if bulbs don't light, repair or discard it. Be sure to unplug the set when decorating.

Do not cover bulbs with decorations not supplied with the set. It may not be designed to handle the increased heating and could melt (potentially exposing live parts).

For Miniature Christmas Lights


When it comes to miniature bulbs, be sure to use bulbs with the same voltage rating (e.g. a 3 volt bulb to replace a 3 volt bulb) to prevent overheating, melting and possible fire. Bulbs are not marked individually with a voltage rating, so save the voltage information on the bulb packaging. It's worth it to prevent the danger resulting from using a bulb the incorrect voltage.

Quickly replace burned out bulbs; the remaining bulbs burn brighter and hotter for each burned out bulb. Light sets with bulbs that burn out rapidly or sets that show signs of melting around bulbs are early indications of defective or incorrect lamps. Do not use these sets.

It's common to tightly wrap or bunch miniature lights together in a cup or pot for special effects. Unless the set is designed or recommended for this use, the heat generated by bunching the lights together may result in melting, which could expose live parts. Christmas lights are created to decorate trees and objects where bulbs are separated and their heat is not concentrated.

For Christmas Light Sets with Standard-Size Bulbs


Examine each light bulb for improper assembly. If the glass readily separates from the bulb's base, the bulb should not be used. Check each bulb for protruding wires from the solder tip at the bulb's base or at the side of the bulb where the glass meets the base. If you find wire protrusions, repair the defect by cutting as much of the protruding wire off as possible. Check each bulb for excessive or irregular solder at the bottom and side of each bulb base, which may prevent complete insertion of the bulb into the socket. Bulbs in this condition should not be used.

Inspect carefully the interior of each light socket. Light sets with standard-size bulbs often have bulb-holders with two metal tabs inside each socket. With the set unplugged, check to see if tabs are used. If they are, there should be a side tab and a center contact at the bottom. If these two metal parts come together when a bulb is inserted, or if these two parts are both upright, a short circuit will occur when the set is used. If you are not sure that the tabs in the socket are correctly located, have a knowledgeable repair person check the set before you use it.

In short, be observant while you get your lights out this year and be sure to test before using them.

Sandy Hayden


Content Credit: Texas.gov
Photo Credit: Christmas Lights Close Up, LED Christmas Light Sets, and Getty Images.